In many metal production industries, we all know that anti-fingerprint is especially important. Anti-fingerprint oil or polishing must be used to make the metal surface smooth and beautiful. So, is it better to choose anti-fingerprint oil between the two?

Officials believe that using anti-fingerprint oil is better, why? Because it not only brings a smooth touch to the metal surface, but also helps protect the metal surface from scratching; prevents oxidation of the metal surface; prevents metal surface from being contaminated, and the like. Therefore, it is best to use anti-fingerprint oil.

Then we should understand some of the characteristics of anti-fingerprint oil when using anti-fingerprint oil, for example:

First, anti-fingerprint oil has protective metal surface, anti-scratch, anti-oxidation, anti-fouling, anti-fingerprint, chemical resistance and solvent.

Second, the anti-fingerprint oil has excellent adhesion to the metal surface, non-toxic and tasteless.

Third, the anti-fingerprint oil film is thin and transparent, the film hardness is high, up to 3-5h, strong metal feeling.

Fourth, anti-fingerprint oil is cured by ultraviolet light, non-volatile at room temperature, environmentally safe.

5, anti-fingerprint oil viscosity can be diluted with water, no residual odor after curing.

6. Anti-fingerprint oil can be dip coated or sprayed.

Yes, anti-fingerprint oil with the above characteristics is a particularly good product, so how do we use such a product?

In fact, using anti-fingerprint oil is as simple as:

1. Clear paint commissioning: Open the lid and mix the material with a clean plastic or stainless steel tube and filter with a 400 mesh filter cloth. Allow to stand for about half an hour.

2. Color compensation adjustment: After diluting with the desired pigment and water, add the open transparent paint, mix uniformly with a 400 mesh filter cloth, and let stand for about half an hour.

3. Matting paint debugging: According to the degree of extinction, matt paint can be used directly. It can be adjusted during micro-debugging. Stir well with a 200 mesh filter cloth before use. Allow to stand for about half an hour.